-
Bosch CR fuel injector solenoid valve F 00R J02 703 for Cummins Hyundai GAZ diesel engine
YS provides matching solenoid valves for various diesel vehicle injectors. The high speed response characteristic of solenoid valve is the key to the injector’s precise control of fuel injection timing, fuel injection duration, and the realization of multiple injection patterns.
The flow capacity of the solenoid valve is the key to ensuring the cycle fuel injection volume of the diesel engine under different operating conditions. YS new process design and improved structure make the solenoid valve dynamic response and working frequency meet the requirements of fuel injection control.
-
Denso fuel injector nozzle cap nut nozzle retaining nut 7# for injector 095000-0760/5800
There are three kinds of nozzle retaining nut for diesel fuel injector produced by YS company: Bosch type nozzle cap nuts, Denso type nozzle cap nuts and Carter nozzle cap nuts.
The fuel injector body, fuel injector spacer block and needle valve are assembled into a whole through the fuel injector nozzle cap nut.
YS fuel injector nozzle retaining nut is reliable in quality, easy to install, and the improved production process of nozzle cap nut reduces the economic cost of customers.
-
CR fuel injector copper washer F 00R J01 806 for Bosch fuel injector 0445120213
YS diesel common rail fuel injector gaskets not only plays the role of sealing, but also has the function of heat dissipation and heat insulation ,to prevent the needle valve from being stuck due to overheating. The selection of fuel injector sealing gasket is very important, we should try to choose the thickness and high quality of washer suitable for the fuel injector. YS fuel injector washers is the best choice for global users.
-
Delphi CR control valve 9308-625C for fuel injector EMBR00101D
Delphi common rail injector control valve of YS has simple structure, light weight and low energy consumption. The opening moment and opening time of the control valve can be adjusted as required. In this way, the opening and closing speed of the needle valve can be flexibly controlled, the fuel injection quantity can be adjusted in a wider range, and the injection law of the fuel injector can be changed.
-
Bosch fuel injector armature F00RJ02517 for Cummins QSB6.7 injector 0445120123
Bosch armature set is composed of armature core, armature plate, armature guide, cushion gasket, valve ball, support seat and so on. Which moves up and down under the action of electromagnetic force, and is a key component of the injector solenoid valve.YS Bosch armature component has good wear resistance, contact fatigue strength and sensitive response.
-
Denso CR nozzle G4S008 for fuel injector 295700-0560 of Toyota diesel engine
The nozzle of YS diesel fuel injector control the vehicle fuel supply accurately, so that the vehicle engine has the correct air-fuel ratio in any state, and keep the engine running smoothly; at the same time, YS nozzle fuel atomization degree is high, to ensure that the fuel can be burned fully.
YS provide Bosch 110 series, Bosch 120 series, Bosch Piezo series, Bosch Φ3.5 series, Denso series, Denso G3, G4 series, Siemens series and other fuel injector nozzles for global customers.
-
Denso pressure valve plate 10# for fuel injector 09500-5800
Denso valve orifice plate of YS can solve the problem of rigid impact during the closing process, reducing dynamic impact stress, attenuating vibration, increasing the life of the valve orifice plate, thereby improving the life of the injector.
